Corrosion Resistance SUS316L Stainless Steel Sheet SS 1.4404 AISI316L Metal Sheet 1.5mm 1220*2440mm
AISI 316L Stainless Steel (UNS S31603)
AISI 316L stainless steel is a modified ultra-low carbon Cr-Ni-Mo series austenitic stainless steel based on AISI 316. It is recommended for parts that cannot be annealed after welding in certain corrosive environments. The addition of molybdenum can provide pitting resistance in phosphoric acid and acetic acid and dilute chloride solutions and corrosion resistance in sulfurous acid. SS316L is resistant to carbide precipitation in the temperature range of 425-870 °C (800-1600 °F), so normal welding can be performed without reducing corrosion resistance. However, when it is heated and kept in the sensitization temperature range for a long time during use, a large amount of carbides will precipitate, so it is usually recommended to use it below 425 °C (800 °F).
Type 316L Stainless Steel Properties
Type 316L stainless steel density is 0.289 lb/in3 (8.0 g/cm3); melting point is 1375-1400 °C (2500-2550 °F); 0.2% yield strength is minimum 25 ksi (170 MPa) in annealed and hot finished condition, minimum 45 ksi (310 MPa) in annealed and cold finished condition; Minimum tensile strength is 70 ksi (485 MPa) in annealed and hot finished condition, ≥ 90 ksi (620 MPa) in annealed and cold finished condition; Maximum Brinell hardness is 217 HB, Maximum Rockwell hardness is 90 HRBW; Thermal conductivity is 12.1 W/m·K at 20 °C (68 °F), 16.3 W/m·K at 100 °C (212 °F).
Chemical Composition
| 316L Stainless Steel Composition, % |
| ASTM Standard | AISI | C, ≤ | Si, ≤ | Mn, ≤ | P, ≤ | S, ≤ | Cr | Ni | Mo | N, ≤ |
| ASTM A276/A276M | 316L | 0.03 | 1.00 | 2.00 | 0.045 | 0.030 | 16.0-18.0 | 10.0-14.0 | 2.00-3.00 | – |
| ASTM A240/A240M | 316L | 0.03 | 0.75 | 2.00 | 0.045 | 0.030 | 16.0-18.0 | 10.0-14.0 | 2.00-3.00 | 0.10 |
Physical Properties
Grade 316L stainless steel physical properties are listed in the table below such as density, melting point, specific heat, electrical resistivity, elastic modulus (modulus of elasticity), thermal conductivity, etc.
Notes:
- 10-6·K-1 = 10-6/K
- 1 Ω·mm²/m = 1 μΩ·m
- 1 g/cm3 = 1 kg/dm3 = 1000 kg/m3
- 1 GPa = 1 kN/mm2
- 1 MPa = 1 N/mm2
| AISI 316L Physical Properties | Metric | Imperial |
| Density | 8.0 g/cm3 | 0.289 lb/in3 |
| Melting point | 1375-1400 °C | 2500-2550 °F |
| Specific heat capacity | 500 J/kg·K at 20 °C | 0.12 Btu/lb·°F at 68 °F |
| Electrical resistivity | 0.74 μΩ·m at 20 °C | 29.13 μΩ·in. at 68 °F |
| Magnetic permeability | 1.01 (Approximate) | – |
| Elastic modulus (Modulus of Elasticity) | 193 GPa | 28 x 103 ksi |
| Thermal conductivity | 14.0-15.9 W/m·K | 8.09-9.19 Btu/ft·h·°F |
Stainless steel plate surface smooth, high plasticity, toughness and mechanical strength, acid, alkaline gas, solution and other media corrosion. It is an alloy steel which is not easy to rust.
Stainless steel features:
1. Complete product specifications and diverse materials;
2. High dimensional accuracy, up to ±0.1mm;
3. Excellent surface quality, good brightness;
4. Strong corrosion resistance, high tensile strength and fatigue strength;
5. Stable chemical composition, pure steel, low inclusion content;
6. The package is in good condition and the price is favorable;
7. Can be done without calibration.
| Surface Finish | Definition | Application |
| 2B | Those finished, after cold rolling, by heat treatment, pickling or other equivalent treatment and lastly by cold rolling to given appropriate luster. | Medical equipment, Food industry, Construction material, Kitchen utensils. |
| BA | Those processed with bright heat treatment after cold rolling. | Kitchen utensils, Electric equipment, Building construction. |
| NO.3 | Those finished by polishing with No.100 to No.120 abrasives specified in JIS R6001. | Kitchen utensils, Building construction. |
| NO.4 | Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001. | Kitchen utensils, Building construction, Medical equipment. |
| HL | Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size. | Building construction |
| NO.1 | The surface finished by heat treatment and pickling or processes corresponding there to after hot rolling. | Chemical tank, pipe. |
Product Tags:
|
|
Corrosion Resistance SUS316L Stainless Steel Sheet SS 1.4404 AISI316L Metal Sheet 1.5mm 1220*2440mm Images
|
